Manual Wheelchair Lifters

Power Pull


The POWER PULL makes it much easier to get a wheelchair up & down a ramp.

Order of operation

  • Roll up beside your vehicle
  • Take hold of the POWER PULL strap
  • Position yourself in front of the ramp
  • Place the hooks on the chair
  • Press and hold the 'IN' button
  • The POWER PULL takes you up the ramp
  • Can be used to exit the vehicle

With the ease of a wireless remote, the POWER PULL can be reached from outside the vehicle, making it a great solution for drivers in wheelchairs! Maximum capacity: 350 lbs & 15 feet of strong, 16 gauge, stainless steel cable.

With an innovative clutch system, the POWER PULL holds tension under all circumstances. It is equipped with a retractable, auto locking system. Therefore it cannot unravel or get tangled up. It always pulls in any slack.

The 'RELEASE' button removes all tension on the cable. This way you don’t need to wait for the cable to unroll. Simply pull the hooks to where you need them. The ‘RELEASE’ button also has a safety on it. It will not release if the POWER PULL is in use.

If the wheelchair is not going up the ramp straight, a breaker prevents you from being pulled over the side of the ramp. This system resets in only a few seconds, allowing you to reposition yourself. All the while, the POWER PULL cable is still holding you in place on the ramp.

When exiting the vehicle, the POWER PULL provides steady tension to help you back down the ramp. In the event that your wheelchair stops its descent because it is hooked on the ramp, the unique clutch system disengages the motor even if the ‘OUT’ button is being held. This means that when the wheelchair is straightened out, there is no slack in the cable, therefore, no uncontrolled rolling back down the ramp. Once the wheelchair is repositioned, the POWER PULL resumes normal operation.

The POWER PULL is ideal for lowered floor minivans. It takes up very little space in the vehicle and therefore is very versatile. The unit (5¨ high x 9¨ wide x 9¨ long) is usually fastened under or behind the third row bench – in a side entry; or in the center – in a rear entry.

XL-Seat / Hi-Lift


The XL-SEAT is a motorised transfer board used on the driver's side that facilitates the transfer out of a manual wheelchair into the driver's seat. It is also now available in the front passenger position.

The XL-SEAT application list keeps growing giving you more options. Its 275 lbs capacity, complete with a sturdy retractable arm adds to a secure feeling when transferring.

The perfect fit with the HI-LIFT that helps you guide your manual wheelchair into your vehicle with ease.

The HI-LIFT is motorised for the in/out and up/down motions but is on a manual track letting you easily guide your chair in without trouble. It has a capacity of 75 lbs. Great for your rigid or foldable manual chair.

As you can see, the mechanism takes up very little space, to the point that the driver's seat back still reclines completely.

Not the only driver? Not a problem! The transfer board is removable to allow easy access to the vehicle. We keep the original seat so you can adjust it back and forth to accommodate each driver's needs.

Lease a vehicle and the XL-SEAT can be installed or removed in less than a day! It is installed into the seat's original floor bolts with little or no modification to your vehicle.

Speedy-Lift


Looking for speed and ease? This fast moving motorised wheelchair lift will get you going! It's designed to make things easier for you as a driver.

Once you have transferred into the driver's seat, take a break and watch your wheelchair slide into place behind you.

Simply back your wheelchair up to the side of your van, activate with the touch of a button and watch you SPEEDY-LIFT do the rest! It even locks you chair in place with its automatic locking device.

It was engineered to lift up to a 75lbs rigid manual wheelchair. It takes only about 10 seconds to pick up your chair and tuck it away into your vehicle

Worried about modifications to your vehicle? The SPEEDY-LIFT is installed into the seat's original anchorage brackets with very little effort.

Don't want to lose seating space in your van? Notice how much room is left! Your back seat is untouched and you can keep the central passenger side seat too. That means you have the use of 6 seats!

XL-SEAT and SPEEDY-LIFT
Paired up together: the perfect match

The XL-BOARD! A great match with the SPEEDY-LIFT.
The XL-BOARD is a non-motorised transfer board designed for the Mazda 5. The XL-BOARD's neat and compact features make it a great solution for people looking for an alternative to a minivan.

Bruno AWL-150 Wheelchair Lifter


The Wheelchair Lifter eliminates the struggle of lifting and storing your folding wheelchair in back of your minivan. This lifter raises and folds your wheelchair, all at the touch of a button. The Wheelchair Lifter is an electronically operated lift that draws its power from the vehicle's battery. When the wheelchair is above the sill of your minivan, simply swing the lift arm into the storage position and lower it to the floor of the vehicle. The lifter raises and stores your wheelchair in just a few seconds. No more struggling and awkward lifting. All the work is done for you.

The Wheelchair Lifter can be installed in any mini van, without losing any of the seating your minivan offers.